Canadian Finishing and Coatings Manufacturing

 

October 27, 2022

 

DOPAG has added progressive cavity pump systems for 1K and 2K materials to its product range

RotordisWhen processing adhesives and sealants, as well as epoxy resin and silicone, continuous metering is necessary for certain applications. Metering systems with progressive cavity pumps are suitable for this as they work based on the volumetric metering principle, meaning they enable highly precise metering of the material quantity.

RotomixDOPAG offers two metering systems with progressive cavity pumps:
• rotordis for processing single-component materials
• rotormix for metering and mixing multi-component materials

Progressive cavity pumps work with no pulsation. Consisting of two components, the stator-rotor
combination is the heart of the progressive cavity pump. This is a volumetric metering system that is sealed leak-free. It conveys the material continuously without any restrictions on volume, with low shear and gently in an axial direction. Progressive cavity pumps are therefore highly suitable for processing filled and abrasive materials. Rotordis and rotormix are each available in four different nominal sizes: 0.01, 0.05, 0.15 and 0.30 ml/U. Rotordis enables shot sizes from 0.002 ml (2 μl) to be processed at a discharge rate of 0.13–45 ml/min, while rotormix enables shot sizes from 0.006 ml (6 μl) to be processed at a discharge rate of 0.26–90 ml/min. In both cases, this is dependent on the viscosity and, in the case of rotormix, also on the mixing ratio. Metering precision is ± 1 per cent.

With rotordis and rotormix, materials with different viscosities can be processed, ranging from
water-thin to highly viscous or pasty. Depending on the viscosity, cartridges, pressure tanks or barrel pumps can be used. With both systems, application is generally carried out directly from the metering system onto the component by means of a nozzle or mixing tube. A DC drive enables dynamic metering and a controllable back suction effect. This ensures a clean thread break at all times.

A specially developed electronic metering control unit ensures optimal adaptation of all application-specific parameters. In addition, straightforward integration into automated production processes is ensured thanks to a standardized interface.

Latest Articles

  • Prev
The Canadian Paint and Coatings Association (CPCA) will host the Canadian Coatings Conference at ...
Gema USA Inc., has announced the addition of Alicia Czyszczon as the controller for Gema.   ...
The ChemQuest Group has welcomed two new global leaders to its team. Sharon Feng, Ph.D., has been ...
The Interpon team at AkzoNobel has designed and launched interpon.com—a vibrant, stylish new ...
Brenntag, a global chemicals and ingredients distributor, has announced a strategic partnership ...
Evonik has launched Ancamine 2880, a new fast-curing and UV-resistant epoxy curing agent that ...
The 2024 AMPP Annual Conference and Expo not only marked a year of significant achievements and ...
With market demand for powder coatings continuing to rise, AkzoNobel is investing more than $30 ...
TOLSA, a global supplier of specialised additives for the paints and coatings industry, reports ...
FIRETEX FX7002, a new thin-film intumescent fire protection coating from Sherwin-Williams ...

Kerrwil Media Limited

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2024 All rights reserved
Funded by the Government of Canada | Finance par le gouvernement du Canada
Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil.