Canadian Finishing and Coatings Manufacturing

 

August 30, 2022

ROSS BlenderDesigned to minimize risk and maximize productivity, ROSS Ribbon Blenders meet OSHA standards with safety shaft guards (no external moving parts) and limit switches that prevent operation of the agitator when any cover or manway is open. In addition, safety grating can be installed on dedicated charge ports or across the entire blender opening for extra protection and to make it easier for operators to dump bags of dry raw material into the blender.

The optional safety grating is highly customizable to provide a tailored solution to the operator’s needs. For example, the pictured 5-cu.ft. ROSS Ribbon Blender features a special three-piece grate designed with an angled and pitched profile in lieu of flat surfaces. This provides a more rigid structure and more open area in the grating to improve the rate of loading. Powders are less likely to accumulate on the pitched surfaces, reducing the amount of sweeping required by the operator. All three sections of the grating have position sensors which interlock with the control panel, ensuring operator safety while running. In addition to the custom grate system, there is also a small loading shelf across the front of the trough that can hold a 23 kg (50-lb) bag and a 4-inch vent port on the cover to install a dust sock.

www.mixers.com

 

Latest Articles

  • Prev
Arya Chem Inc., a provider of chemical solutions, has partnered with DCL, a manufacturer of colour ...
Brenntag has been awarded the International Sustainability and Carbon Certification (ISCC) PLUS ...
AkzoNobel has developed a new 2K solvent-borne primer in conductive and dark grey for automotive ...
LANXESS Corporation’s Material Protection Products (MPP) business unit has expanded distribution ...
PPG has engaged Goldman Sachs & Co. LLC as financial advisor to assist in a review of strategic ...
Mustang customers have an all-new way to personalise their ride with the car’s first-ever factory ...
The Protective Coatings Market is projected to reach US$ 46.51 billion by 2033 according to the ...
The Association for Materials Protection and Performance (AMPP) ha announced a donation from the ...
The Association for Materials Protection and Performance (AMPP) Annual Conference + Expo 2024—the ...
The physical test equipment industry has lost a true legend. Paul N. Gardner Jr., former president ...


CFCM BYK9500 400BYK-Gardner USA announced its new premium line of dry film thickness gauges, the byko-test 9500 series, for measurements on ferrous (Fe) and nonferrous (NFe) substrates. The two new versions of the byko-test 9500 replaces the 8500 series. And both models in the series come with a detachable probe and a cable for different modes of operation.

Read More

Kerrwil Media Limited

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2024 All rights reserved
Funded by the Government of Canada | Finance par le gouvernement du Canada
Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil.