Canadian Finishing and Coatings Manufacturing

 

July 28, 2022

 

Ross Vertical BlenderThe ROSS Vertical Blender is designed for reliable and gentle mixing of friable solids, abrasive materials, and shear-sensitive products. It consists of a low-speed auger that orbits the periphery of a conical vessel while gently lifting material upward. The thorough agitation allows product from the top portions of the batch to cascade to the bottom while blending with material being drawn upwards by the auger. The steep-angled vessel allows efficient blending of batches as small as 10 per cent of the maximum working capacity and enables quick discharge of the finished blend. Requiring no bearings or packing glands in the product zone, the ROSS design promotes 100 per cent discharge and is easy to maintain while minimizing the risk of contamination.

 

In addition to solid blends, wet applications such as flowable slurries and pastes are routinely mixed in the Vertical Blender. This machine can be jacketed for heating or cooling with water, oil, or steam. When coupled with vacuum conditions, the continuous turnover of materials heated within the vessel leads to fast drying and cost-effective solvent recovery.

The pictured Vertical Blender has a maximum capacity of 32 ft^3. The design is ideal for processing large volumes where floor space is limited. Sizes range from lab scale to full production models.

www.mixers.com

 

Product News

  • Prev
Paul N. Gardner USA has launched its new offering of Cross Hatch Adhesion Testers—three kits in ...
IFS Coatings recently launched IFS Puroplaz PE16, a tough thermoplastic modified polyolefin powder ...
BYK-Gardner USA is now offering a self-calibration option for its byko-visc RT Rotational ...
The global market for conductive pressure-sensitive adhesives (PSAs) is forecast to reach $12.5 ...
BYK-Gardner USA announced its new premium line of dry film thickness gauges, the byko-test 9500 ...
PPG announced the launch of PPG DP7000 Air-Dry Primer and a range of dedicated ancillaries across ...
AkzoNobel recently launched Interpon D1036 Low-E, an architectural powder coating that can be cured ...
DYRUP paint by PPG has introduced a new “bag-in-a-box” packaging for its Dyrup Wall Extra Covering ...
Evonik’s Coating Additives business line is expanding its TEGO Foamex product range with a new ...
Paul N. Gardner USA (GARDCO) recently introduced its new X-Cut Cross Hatch Adhesion Tester, which ...


CFCM BYK9500 400BYK-Gardner USA announced its new premium line of dry film thickness gauges, the byko-test 9500 series, for measurements on ferrous (Fe) and nonferrous (NFe) substrates. The two new versions of the byko-test 9500 replaces the 8500 series. And both models in the series come with a detachable probe and a cable for different modes of operation.

Read More

Kerrwil Media Limited

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2024 All rights reserved
Funded by the Government of Canada | Finance par le gouvernement du Canada
Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil.